Movement seen from the front
Good Front
A five-second front-view example. Compare the direction of the legs with the diagrams above; the title “Good Front” is the publisher’s original title.
How the two standards describe the build of the Miniature Schnauzer — size, proportions, head, body, legs and gait — in plain language.
Atlas 的教育性摘要。FCI 和 AKC 未审核或批准,这不是官方译文。
本页提供英文和塞尔维亚文版本,当前显示英文版。
Black and silver Miniature Schnauzer in profile at the CACIB show in Tallinn (17–18 August 2013): the black body, the silver-white patch on the chest and the silver on the muzzle and lower legs.
Томасина · CC BY-SA 3.0 · Wikimedia Commons
A side view helps you recognise the outline. Stance, camera angle and coat change what you see; the photograph is an example, not a measurement or a verdict about this dog.
The FCI gives the height at the withers as 30 to 35 cm; the AKC as 12 to 14 inches, which is 30.48 to 35.56 cm. The two ranges nearly coincide. They differ in what happens outside them: the FCI grades a deviation of up to 1 cm as a fault, more than 1 and less than 2 cm as a serious fault and more than 2 cm as disqualifying; the AKC disqualifies any dog under 12 or over 14 inches.
Both ask for a nearly square dog. The FCI says the height at the withers is nearly equal to the body length, and that the length of the head, from the tip of the nose to the occiput, is half the length of the topline (withers to the set-on of the tail). The AKC says the overall length from chest to buttock appears to equal the height at the withers.
The withers form the highest point of the topline in both standards; the topline slopes slightly from the withers towards the rear.
Miniature Schnauzer head seen obliquely: brows above the eyes, the bridge of the nose and the long beard. The ears are upright in this photograph; see the standards comparison for the different descriptions of ears.
Tatiana Chessa (Maquesta) · CC BY-SA 3.0 · Wikimedia Commons
Look at the brows, bridge of the nose and beard. Hair shapes the outline, but cannot tell you how the teeth close. This portrait is taken at an angle, so it cannot establish head proportions.
FCI: the head is in keeping with the dog's force; the skull is strong and long without a markedly protruding occiput, the forehead flat, wrinkle-free and parallel to the bridge of the nose. The stop appears well defined because of the brows. The muzzle ends in a blunt wedge with a straight bridge. The cheeks must not interfere with the rectangular shape of the head (with the beard).
AKC: the head is strong and rectangular, its width diminishing slightly from the ears to the eyes and again to the tip of the nose. The foreface is parallel to the top skull, with a slight stop, and at least as long as the top skull.
Both describe a scissors bite. The FCI counts 42 pure white teeth; the AKC defines the scissors bite as the upper front teeth overlapping the lower ones so that the inner surface of the upper incisors barely touches the outer surface of the lower incisors. Pincer (FCI) and level (AKC) bites are faults; the FCI treats a faulty mouth such as over- or undershot as disqualifying, the AKC lists undershot or overshot jaw as a fault.
Eyes: FCI medium-sized, oval, facing forward, dark; AKC small, dark brown, deep-set, oval, keen. Ears: see the standards page — the FCI describes drop ears, the AKC describes both cropped and uncropped ears.
Small overlap, surfaces touch. Requested by both standards.
Edges meet; no overlap. A fault in both standards.
Upper teeth in front, with a gap. The lower jaw is shorter.
Lower teeth in front. The lower jaw is longer.
Scissors bite: the upper incisors close just in front of the lower incisors, so that the inner surface of the upper incisors lightly touches the outer surface of the lower ones. This slight overlap is normal and wanted; both standards ask for it. In Serbian-language FCI standards of the Kennel Union of Serbia it is called "makazasto zubalo".
Level (pincer) bite: the upper and lower incisors meet edge to edge, with no overlap. The FCI lists the pincer bite as a fault; the AKC lists the level bite as a fault. Serbian-language FCI standards name it "klještasto zubalo".
Overshot bite: the lower jaw is shorter, so the UPPER incisors lie clearly in front of the lower incisors and a gap is left between the two rows — more than the slight overlap of a scissors bite. In veterinary English it is also called mandibular brachygnathism (class 2).
Undershot bite: the lower jaw is longer, so the LOWER incisors lie in front of the upper incisors. In veterinary English it is also called mandibular prognathism (class 3).
A wrong bite is not a variety of the breed. The FCI treats a faulty mouth, such as an over- or undershot or wry mouth, as a disqualifying fault; the AKC lists an undershot or overshot jaw and a level bite as faults. The two documents therefore grade the same deviations differently.
The four diagrams isolate the relationship of the incisors, not the complete dentition. For the last two bites Atlas gives the English terms with the position of the teeth, because no Serbian name for them could be confirmed in the sources checked.
Match each number to the region on the photograph. These markers locate broad surface regions, not bones or hidden joints. In particular, the lower edge of the furnishings is not the bottom of the ribcage.
Photograph: Sale23 · CC BY-SA 3.0. Atlas added numbered region markers; the annotated presentation is also CC BY-SA 3.0. Wikimedia Commons · CC BY-SA 3.0
Neck: FCI strong, muscular and nobly arched, blending smoothly into the withers, the throat skin tight without folds. AKC strong and well arched, blending into the shoulders, the skin fitting tightly at the throat.
Body: FCI back strong, short and taut, loins short, strong and deep, croup slightly rounded, chest moderately broad and oval, reaching the elbows, flanks not too tucked up. AKC body short and deep, brisket at least to the elbows, well-sprung ribs, short loin, no tucked-up appearance at the flank.
Tail: the FCI says "Natural; a sabre or sickle carriage is sought after". The AKC describes a tail set high and carried erect, docked as the standard says. See the standards page for the exact wording; Atlas gives no advice on docking.
Forequarters (FCI): the forelegs are strong and straight, seen from the front not close together. The shoulder blade is "as sloping as possible", at about 50° to the horizontal; the upper arm forms an angle of 95° to 105° with the shoulder blade; the elbows are close-fitting, turning neither in nor out. The pasterns are vertical from the front and slightly sloping from the side.
Forequarters (AKC): forelegs straight and parallel from all sides, strong pasterns, close elbows, sloping shoulders laid well back so that from the side the tips of the shoulder blades are in a nearly vertical line above the elbow.
Hindquarters: the FCI describes legs standing obliquely from the side, parallel but not close together from behind, with well-angulated, firm hocks and a short metatarsus vertical to the ground. The AKC describes strong-muscled, slanting thighs, well bent at the stifles, with the hocks extending beyond the tail in stance; the rear pasterns are short and perpendicular to the ground.
Feet: both ask for short, round "cat feet" with arched, compact toes; the AKC adds thick black pads and the FCI short dark nails.
In a trot, the pairs are diagonal. In a pace, the pairs are on the same side. Compare the two alternating pairs below, then look for the diagonal rhythm in the video.
Pair A
Pair B
Pair A: left front and right rear. Pair B: right front and left rear.
Pair A
Pair B
Pair A: left front and left rear. Pair B: right front and right rear. The FCI lists pacing as a fault.
Two paths stay aligned. Compare this with the front and rear views in the film.
The paths converge onto one centre line. The AKC lists this as a fault for the Miniature Schnauzer.
The long body axis sits at an angle to the direction of travel.
The front feet swing outwards on an arc instead of travelling straight forward.
High front-foot lift with wrist flexion. The line shows the exaggerated lift; the joint itself is not drawn.
The rear contributes forward propulsion. Weak rear action is a fault; no numerical stride threshold is given.
FCI: "Flexible, elegant, agile, free and ground covering." The forelegs swing as far forward as possible and the hind legs provide the drive; the front leg of one side and the hind leg of the other side move forward at the same time, and the back, the ligaments and the joints are firm. Pacing movement is listed as a fault.
AKC: the trot is the gait at which movement is judged. Seen from the front, the forelegs with close elbows move straight forward; going away, the hind legs travel in the same planes as the forelegs. From the side, the forelegs show good reach and the hind legs strong drive. Faults named are single tracking, sidegaiting, paddling in front, hackney action and weak rear action.
Follow reach in front, drive behind and the stability of the back. A single paused frame cannot show the rhythm.
Follow the path from the shoulder to the foot and watch the elbows. Do not confuse forward reach with high lifting of the front legs.
Follow both hind legs and their alignment with the forelegs. The small inward inclination described by the AKC does not mean crossing the feet.
Westminster’s official 2026 Miniature Schnauzer breed judging film. Watch it alongside the three viewing prompts above. It is an AKC ring context: use the FCI/AKC comparison for differences between the standards.
Miniature Schnauzers | Breed Judging 2026
YouTube is contacted only when you load the player. It uses privacy-enhanced mode and does not start by itself.
Official ring footage · © Westminster Kennel Club Dog Show · 30:15 · 3 February 2026. A judging film, not a narrated anatomy lesson. Publisher’s page
Four short archive clips published by Chris Levy in 2009, rediscovered through Schnauzers-Rule. They bring the front view, examination on the table and height checks into focus alongside the longer ring film.
These are older American show examples. Read them alongside the current FCI and AKC standards; their measuring context does not establish an FCI procedure or a measurement of any dog on Atlas.
Good Front
A five-second front-view example. Compare the direction of the legs with the diagrams above; the title “Good Front” is the publisher’s original title.
Going Over a Schnauzer
A short example of going over a Schnauzer. Use it with the map of body regions to connect the written terms with a real dog.
Measure for Oversize
An archive example using a wicket, paired with the lower-limit clip. The AKC size range on this page explains the context.
Measure for Undersize
The companion lower-limit example. Compare both clips with the height chart and keep the FCI and AKC ranges separate.
Videos published by Chris Levy · @abiquadogs · 2009. Played from the original YouTube channel.
Each player loads independently, only when requested, in YouTube’s privacy-enhanced mode. There is no automatic playback.
The FCI standard PDF ends with its own "Surface Anatomy" diagram naming the parts of the dog (withers, point of shoulder, point of buttock, hock and others). It belongs to the FCI and is not reproduced here; open the PDF, page 8.
For the complete map of named anatomical points, use the original FCI plate. It identifies the elbow, stifle and hock separately, including points that cannot be located reliably through the coat in our photographs.
It does not explain how to measure a dog, does not give angles beyond those the FCI states, and does not judge any individual dog. A dog's conformation is judged by qualified judges at a show, against the standard of the organisation that holds it.
FCI FCI Standard No. 183 — Zwergschnauzer (Miniature Schnauzer), PDF
American Kennel Club AKC Glossary — movement terminology
Westminster Kennel Club Dog Show Miniature Schnauzers | Breed Judging 2026 — official video
Chris Levy Chris Levy — Good Front; Going Over a Schnauzer; Measure for Oversize; Measure for Undersize
Schnauzers-Rule.com Schnauzers-Rule — breed articles and archive video references
Atlas 与 FCI 和 AKC 没有关联,也未获得它们的认可。名称和文件归这些组织所有。